Sand casting
Sand casting is one of the most popular and simplest types of casting that has been used for centuries. Sand casting allows for smaller batches to be made compared to permanent mold casting and a very reasonable cost. Not only does this method allow for manufacturers to create products for a good cost there are other benefits to sand casting such as there are very little size operations. From castings that fit in the palm of your hand to train beds (one casting can create the entire bed for one rail car) it can be done with sand casting. Sand casting also allows for most metals to be cast depending in the the type of sand used for the molds.
Sand casting requires a lead time of days for production at high output rates (1-20 pieces/hr-mold), and is unsurpassed for large-part production. Green (moist) sand has almost no part weight limit, whereas dry sand has a practical part mass limit of 2300-2700 kg. Minimum part weight ranges from 0.075-0.1 kg. The sand is bonded together using clays (as in green sand) or chemical binders, or polymerized oils (such as motor oil.) Sand in most operations can be recycled many times and requires little additional input.
